What have you done to your car today?

[ADIKT]

 Stoffa said:

Instead of taking it to my mates workshop to fix my leaking turbo oil drain and giving it a service I ended up cleaning the vomit off the baby seat in the back and stuck at home with a sick little boy

Shouldnt have ripped those helis wit ya boi in da back ow

[Roo]

 pl0x said:

good height imo

Pic from the back has my mate sitting in the boot for photo purposes lol

[BLAZD]

what wheels?

[Roo]

 BLAZD said:

what wheels?

They\'re Impul 17x9\'s. The set is a pair of 9\'s (+38) and a pair of 8\'s (+31), but the pics are with both 9\'s on as that\'s all my mate could bring up at the time. In pics they\'re dodgily spaced at 3mm front and 6mm rear so i could let it off the jack.

Rears hit the strut and fronts need a little bit of spacing to clear brakes so they will be spaced 5mm front and 10mm rear making 8" +26 and 9" +28

Then i just need to throw the adjusties in.

[Kiwi_Fozze]

i assume you are running either well matched tyres to keep the rolling diameter or rwd?

[Roo]

 kwi_fozze said:

i assume you are running either well matched tyres to keep the rolling diameter or rwd?

Yeah rolling diameter is the same, rwd conversion is on the cards though

[STiNGR]

[Marky]

Am I seeing something melted? Hard to tell from photo

Also your EJ20 looks funny

I picked this up for $20, now I\'m not sure why I bought it apart from "$20, I\'m wasting money if I DON\'T buy it" haha

[Johnnynz]

I have the same gauge, looks super cool when lit up

[STiNGR]

 Marky said:

Am I seeing something melted? Hard to tell from photo

Also your EJ20 looks funny

I picked this up for $20, now I\'m not sure why I bought it apart from "$20, I\'m wasting money if I DON\'T buy it" haha

There was a flywheel in there at one stage... R32 gtr

[marc]

Thats a solid effort above :\'(

[slydog]

Finished off paint work! Booked car in for dyno on Wednesday

[Marky]

 STiNGR']

[quote name='Marky said:

Am I seeing something melted? Hard to tell from photo

Also your EJ20 looks funny

I picked this up for $20, now I\'m not sure why I bought it apart from "$20, I\'m wasting money if I DON\'T buy it" haha

img]http://images.trademe.co.nz/photoserver/tq/246668069.jpg[/img]

There was a flywheel in there at one stage... R32 gtr

Oh wow, heard about that today. You\'re a lucky camper for sure

[STiNGR]

How the fuck did you hear about this....?

[johnny5]

 STiNGR said:

How the bother did you hear about this....?

with his ears I\'d say ;D

[Marky]

Haha, chch not a big place, some guy at the nzpc park up was talking about a gtr which sent a flywheel err, flying.

[STiNGR]

 Marky said:

Haha, chch not a big place, some guy at the nzpc park up was talking about a gtr which sent a flywheel err, flying.

Ohh yup. Far out news does travel!! Yer we kinda lucky we have our legs still. Least it didn\'t chuck a leg out of a 20k motor!

[lachlan]

installed some petrol in the tank . then released it to atmosphere via the exhaust promptly around the hills .

[petrolheadjman]

 STiNGR']

[quote name='Marky said:

Haha, chch not a big place, some guy at the nzpc park up was talking about a gtr which sent a flywheel err, flying.

/quote]

Ohh yup. Far out news does travel!! Yer we kinda lucky we have our legs still. Least it didn\'t chuck a leg out of a 20k motor!

Very lucky!!

I\'ve heard the flywheel sits around about where your legs are in the car?

[Roo]

Put half of my adjusties in and did some guard hammering

[LinkemSuby]

Blew up the motor lol time to build something decent for it. Building a ej20g closed deck block now. thinking about geting a piston and rod set off realstreet prformance. also going to use ej20k type r heads, new job with big payrise means i have some money to burn and save power goal is 250kw+ and reliable.

http://realstreetperformance.com/store/je-pistons-brian-crower-h-beam-rods-subaru-wrx-ej20-ej205-ej207-863.html

that\'s the piston and rod set. ok so what do i need to do if anything to get my power and reliability goal with the heads. i have a fair idea however id like to be sure before i start wasteing money.

I know the block needs very good bearings and poss dry selves?

[funkytown]

sleeves are a waste if using a closed deck. get some i beams over h beam. genuine oem bearings throughout. arp head and case bolts. je pistons are the goods. as are factort v3/4 heads. bolt on appropriate turbo at run up about 600cc injectors. job done

[rex-leggy]

id scratch the I beams and use h beams . use subaru 575cc topfeeds and save some $$.

standard case bolts will hold up fine . all depends if youll be looking for more later but that engine decribed above would be a waste with only 600 cc injectors

[Koom]

 rex-leggy said:

id scratch the I beams and use h beams . use subaru 575cc topfeeds and save some $$.

standard case bolts will hold up fine . all depends if youll be looking for more later but that engine decribed above would be a waste with only 600 cc injectors

I\'d agree.

[gotasuby]

If only 250wkw was wanted a bog standard ej207 v7 sti motor would nearly be ok and reliable. But a forged cdb will be fine up to 300wkw. Any more and I would be looking into case bolts and sleeves etc like we are currently doing for 400+kw