What have you done to your car today?

[G-unit]

4 stud duurrr

[96WRX]

 G-unit said:

4 stud duurrr

25mm spacers 5 stud to 4 stud problem solved

[Joker]

except they are ugly so no

[Timmah]

Bought some Magnatec oil in preparation of the upcoming oil change. Ran out of money to get the oil filter

Sprayed some WD40 on the bonnet locking device and now when I close any door there's no odd high pitch noise

[DRFVDR]

 JoKer said:

except they are ugly so no

would fit the revenger though ??

[Joker]

yup

[BLAZD]

They are beautiful

[BLAZD]

 CEG']

[quote name='BLAZD said:

f*** I wish

/quote]

sup ***t

We need to catch up !

[petrolheadjman]

Took it for a drive and vibration has (mostly) gone away. very strange but I can now drive on motorway

[ryn]

Cleaned my washer bottle out.... *shivers* Full of algae and crap - took bloody forever to get my meatclub hands in enough to undo one of the clips.

[Jakee]

Mowed the lawns with it. Well, 4 lines of lawn.

[Jimbob]

tidied up wiring

sorted out what im gonna wire up on the boost solenoid setup

sorted out inlet manifold so it sits flush on the block

worked out ow the cooling system will sit

[rex-leggy]

attacked the car with a grinder to make a 600mm intercooler (flipped) fit on a bc5

next to attack new bumper support ;D

[LAZLO]

changed my wastegate hose and put in a new windscreen,it was cheap

[QRAF]

sanded and polished my cambelt cover i don't know if i'll get anymore lines out without a actual grinder and polisher

autosol makes it look nice tho ;D

[Jimbob]

fitted manifold found out i need crankcase breather to suit a v3/4 setup so could not fit the turbo today

found out i have the correct brackets for the sti topmount i have.

[Jakee]

Trying to eliminate everything to ensure head gasket / cyl is okay. Have flushed the engine and radiator and changed the thermostat. I think that the problem is the water pump so next weekend we are putting it on the hoist and having a crack at the water pump. If that doesn't solve it then it's off to M.D Engineering for new motor.

[Guest]

 Jakee said:

Trying to eliminate everything to ensure head gasket / cyl is okay. Have flushed the engine and radiator and changed the thermostat. I think that the problem is the water pump so next weekend we are putting it on the hoist and having a crack at the water pump. If that doesn't solve it then it's off to M.D Engineering for new motor.

heater core?

[Jakee]

 Ichi Ban']

[quote name='Jakee said:

Trying to eliminate everything to ensure head gasket / cyl is okay. Have flushed the engine and radiator and changed the thermostat. I think that the problem is the water pump so next weekend we are putting it on the hoist and having a crack at the water pump. If that doesn't solve it then it's off to M.D Engineering for new motor.

/quote]

heater core?

I am not too sure. Do you have facebook? I will chat you some more in depth details?

[Guest]

heater core return water opens thermostat

bypass heater core with a loop hose on the block side and recheck

[thorpy]

Not my car , but spent the day being an instructor for proactive drive , Sooo much fun.

http://www.proactivedrive.org.nz/

[96WRX]

installed vf22, 440cc, afm, ecu went from the stock 10psi to 20psi lol time to start saving for brembos or 4 pot subaru calipers lol ;D good day but am so bloody tired from driving and testing

[Jakee]

My partner bought me new Autosport fixed back bucket seats She decided no one could take shot gun from her if she paid for the seats!

[Guest]

my gdb has now travelled 100,000km. Have so far replaced rotors and clutch and cambelt sooooo should be good for another 100,000km . i would hope anyways.

[slyrwd]

Finally removed all interior of my GT Track car, now contemplating a full rewire.. So much shit dont needa be there n will be quicker to rip it all out then redo it in a better form..