Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

What have you done to your car today?


Guest keltik

Recommended Posts

 DRFVDR said:

Really dont see an issues with that I would just pop it back in the bolt will hold it in place :) if u really worried about it super glue would work

I did pop it back in place, and bolted it back on. But the bar was sitting on a very bad angle as a result, it jut pops right back out.

Link to comment
Share on other sites

Changed oil and filters in the wagon today. First time since before megameet. Oil came out a bit darker than usual but it had done 16,000km and one track day!

I decided to skip my usual task of pre-filling the oil filter and fired her up. The sound of 24 oil starved lifters is quite disturbing. Shut it down straight away and cranked with the sensors unplugged to get pressure back up.

Wound the front struts down 2 turns and the rears down 3. The car sits a bit closer to where i want it now.

Was nice to see in the 16,000km since the last time i popped the covers off - there wasnt a single drop of oil out of place and i'd used absolutely no oil or water. The genuine air filter from Subaru also seems to have changed from the paper element ive previously seen to a cottony woolly fiber element. It was all white and fluffy....looking forward to seeing how it fares another 6 months down the road.

Link to comment
Share on other sites

 petrolheadjman said:

Sorted the back tail lights on my BH. They were collecting water as the seal had gone :S also found that i didn't have the middle back lights or brake lights as the bulbs were well not in a good state.

The lights held a remarkable amount of water!!

Anyways all sorted so the wagon is in good condition :)

Ha I had the same issue on my BH...silicone did the trick tho.

Link to comment
Share on other sites

 subypower']

[quote name='petrolheadjman said:

Sorted the back tail lights on my BH. They were collecting water as the seal had gone :S also found that i didn't have the middle back lights or brake lights as the bulbs were well not in a good state.

The lights held a remarkable amount of water!!

Anyways all sorted so the wagon is in good condition :)

/quote]

Ha I had the same issue on my BH...silicone did the trick tho.

Yeah i used silicon too, hopefully it does the trick!

Link to comment
Share on other sites

Guest boostcut

i just chucked a lazy 2.4 engine in an rvr today. skinned my knuckles a couple times and got pissed off at teaching the dopey cunt who owns it everything and having to justify why i was doing everything... but his mrs did cook me a sweet lunch.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts
×
×
  • Create New...