Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Dumb Question Thread!


Jambun

Recommended Posts

I was sure it was 60l. Noticeably better economy running CL wideband as opposed to narrow on 340km trip today very worthy investment. Only entertainment I have when the subs not in 6"x4 are shit for music. Furtherest I think I got was roughly 60km from when the light came on and didnt die.

Link to comment
Share on other sites

Iv got a few questions myself, im looking at a 1996 legacy gtb and would like any information on them that anyone has. how much horsepower?

Whats prone to breaking? pretty nervous as its done a few kms but it has 10g of receipts in the last 2 years on everything apart from the engine...

i have previously owned a 1999 legacy gtb and loved every bit of it until blew the big end bearing which then required the long block to be reconditioned... so most of all i want to know if the 1996 gtbs are prone to blowing big end bearings like the 99 gtbs are rumored to..

thanks in advance for any tips/advice and help!!

Link to comment
Share on other sites

Best advice: Get one with a rebuild or spend a touch more for a low KM one, they\'re all pretty notorious for BEB failure - just age and the treatment they generally receive. Just hunt around - for every high km one you see there will be another with half for the same cost, they aren\'t exactly rare cars these days

276hp minus 15 years of use = a bunch?

From what I\'ve seen you can generally pick up a BH for the same (ish) $$ as a BG of similar age & condition, just personal preference but I\'d steer towards getting the later model anyway

Link to comment
Share on other sites

 B4 I was 250T said:

Hey y\'all. Want a new boost gauge. I like Autometer cobalt. Anyone got a) any info about auto meter and b) NZ supplier please. Cheers y\'all 8)

Buying off amazon was a lot cheaper for me. With youshop, you would be paying NZD $17.50 postage assuming Amazon does free shipping.

That being said, you could probably pick one up cheap second hand on trademe.

Link to comment
Share on other sites

Not really a dumb question but don\'t wanna start a new thread too,

Would a GC8/GF8 or a GD,GG front sway bar fit a Legacy BE/BH??

i know the rear ones aren\'t straight fit but i wanna know if the front ones are or aren\'t. Need a definite answer,Yes or No, not "yeah it should"

Link to comment
Share on other sites

Where do I buy an oil sandwich plate thing from? I got one with my defi genome gauges, but it\'s missing the seal and the seal place I went to in onehunga were not so confident in giving me something. So it might be easier to just buy a new one then risk using the wrong seal. See scarles sell a pro sport one, will that do?

Link to comment
Share on other sites

  • General Member

Taumaranui had 98 last time I was through about 3 months ago.

I have used touch up paint on a few deep stone chips in my Altezza, I have built them up a little high now though. Can I use a realy high grain Sandpaper and wet sang it back or will I damage the original paint?

Link to comment
Share on other sites

  • Admin

anyone else out there with a TT legacy got an almost buzzy sound coming from engine bay when under load? sounds like its coming from the passenger side so thinking primary ready to shit its pants. doesn\'t make a peep when stationary so am struggling to work it out without having to try get into the turbo.

Link to comment
Share on other sites

  • Guest locked this topic
Guest
This topic is now closed to further replies.
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts
×
×
  • Create New...