What have you done to your car today?

[slydog]

lol

[Jakee]

 Jason47']

[quote name='Jakee said:

Tein Type Gravel shocks all round, removed the G tech springs from the front and replaced them with Jamex superlows, on the hunt for another pair for the back, took off the pod filter and cold air box I put on last night because the car doesn't idle high enough when starting for a few seconds and takes longer to start when the motor is hot. Painted a fluro green lip on my front and back wheels and now sourcing a second front lip for some Herra Frush action

/quote]

where can i get a cold air box for my legacy?

make one man.couple sheets of alloy tapemeasure ect.

Made mine out of carbon fiber. Wasn't too hard, carbon fiber, no more gaps and a rubber stopper around the top to keep it from cutting my hands when working on the car and to insulate it a bit more from the motor.

Where do i get carbon fibre from? how much would it cost? where be best place to mount it? where factory 1 is on my car i have the alarm speaker and some other thing there that would make it difficult to put right behind headlight

Put it where my factory one was, kept it isolated from my headlight and ran a duct from the bottom of my bumper up around the wheel well and to it through the hole where the factory box got air from. If your alarm speaker is in the way, move it, problem solved. Mount it on your firewall or something, thats where mine is.

[thorpy]

Fitted my new hawk pads and flushed with motul rbf600.

[chappell943]

Took all 4 wheels off and gave them a proper clean as old owner let brake dust build up for too long, cleaned brembo's, got a new battery clamp and adjusted my rear sway bar.

[WRXONP]

changed my waste gate setup around again but am happy with it now . changed the pipe work around and changed flanges etc. also heat wrapped it up . looks pure mint now . also finally replaced that Dang leaky gearbox out put seal. tomorrows mission is change the suspension over with the aid of battery rattle gun :-)

[WRXONP]

oh and replaced o2 sensor again . 4 pots coming :-)

[Joker]

replaced snapped axle, removed slicks and did some testing

[Pelvin]

 JoKer said:

replaced snapped axle, removed slicks and did some testing

nice

[kwikaus]

painstakingly straightened all the bent fins on the top mount today.

[Pelvin]

 kwikaus said:

painstakingly straightened all the bent fins on the top mount today.

Been there, i feel your pain

[QRAF]

 Pelvin']

[quote name='kwikaus said:

painstakingly straightened all the bent fins on the top mount today.

/quote]

Been there, i feel your pain

Same

[Pelvin]

 QRAF']

[quote name='kwikaus said:

painstakingly straightened all the bent fins on the top mount today.

/quote]

Been there, i feel your pain

Same

Worth it though, looks a lot better (guess it functions better too )

[kwikaus]

yeap was more for the function of it than looks

[johnny5]

installed 3 inch turbo back exhaust

[WRXONP]

got a mean rumble johnny ? here's what i did

[johnny5]

That she does Bro just took it on the motorway to heat the gaskets up so they seal not as bassy as my old car but its rumbling and thats what I missed the most even the Mrs was lovin it

[kwikaus]

dismantled half the engine bay today to change the plugs, also moved the alarm siren and switch from the front of the bonnet to a new location that is a lot harder to get to.

[slyrwd]

Put my Cusco adjusties in my GT and droped it to the ground after sitting on axle stands for 2 months.. so low, K brace is about 60mm of the ground.. willl have to wind em up next weekend.. looks so sik tho..

[WRXONP]

today changed out suspension back to black kyb strut and super low springs.washed it lol. rattle gun is mean help lol added some lube to the Wheel nuts too lol. .

[JDMGTB]

New coil packs, new NGK iridiums, removed bottom cat converter and muffler, ran 3" straight through pipe all the way to rear muffler, goes real well now, few goods pops, sounds like anti lag, not all that loud either which is a bonus cos I thought it'd be rediculous.

[Guest]

swapped it haha

[madmike]

 Spec C said:

swapped it haha

for?

[DRFVDR]

looks like a non standard Evo9

[subi4snow]

Put gauges in the dash (top centre) took a bit of hacking and sanding but it'll do the job for now and will try do a decent job of it once uni exams are over........ Better than having a din sized hole with nothing at all in it

[Koom]

Changed a bulb in the foglights. Big job. Celebrating my efforts with a beer ;D