Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

What have you done to your car today?


Guest keltik

Recommended Posts

 Sancho said:

finally found a boost gauge I like... pity it's not green... and perhaps the wrong model?

What you can do is remove the bulb from the Lamco gauges, so you can either make the bulb green by putting a green cover on it off of a different light, or the way I did and buy a green sharpie and colour it in :P

Link to comment
Share on other sites

Got the b20 volvo boat engine back from the machine shop and the camshaft back from peter at kennelly cams after a performance grind(i highly recommend his services!very easy guy to deal and won't rip you! Not to happy with the ring eng gap on 2 of the bores being .028 would rather .020 like the other 2 take got sleeved but never mind it is only a boat.. here re some picture of parts compared to ej20

1975 volvo b20 engine:

016_zpsysorfnw1.jpg

023_zps3y8yo9zl.jpg

006_zpshraw87rf.jpg

007_zpszalu0pqo.jpg

008_zpsh88xdd1c.jpg

013_zps5qgiduyn.jpg

017_zpswrgxofug.jpg

Edited by hijacka
Link to comment
Share on other sites

Jammed a cold air feed into the mix - this is looking through the drivers' side foglight hole

Is pretty well sealed in all directions other than facing forwards so no risk of waterlogging it, well unless I try to ford something with the wagon (chances of this are slim to be fair)

DSC_0386_zps6iwrrbts.jpg

DSC_0382_zpsoxojg090.jpg

Works good, just need to swap out the silicon joiners for black and I'll be a relatively happy camper. Would be a b@stard of a job to try and make it work with solid bends, might end up doing it in time anyway

Link to comment
Share on other sites

Tinkered with the tune. S206 avcs mapping and a bit of fiddling with the target boost table. Flash it on tomorrow and test. Disabled flat foot shifting for the gymkhana, increased launch rpm to 6k with 100rpm hystereses. Bit of fine tuning with the launch control needed, i think its still only getting 0.5 bar on launch. Higher rpm might fix it, we'll see.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts
×
×
  • Create New...